Bill's advice on conduits, electricity and perserverance / Conseil sur des conduits, l'électricité, persévérance

Bill from PCH sent along the link to his presentation which covers a lot of good ideas for the project. His presentation is tailored to a large rollout but the ideas seem to be the same for the smaller type of rollout that I'm interested in. Regulating Communications Infrastructure for Growth (PDF presentation, 2 MB) Bill had some other great points in his e-mail that I think are worth repeating:

1. "If the roads are going to actually be _open_, then you probably want to put in home-runs of conduit from each house to a street junction box (either on the sidewalk, or in a manhole, if you can afford that), so that all new communications utilities can share it, and then put in several bigger conduit from that box out to the edges of the community, where they can meet up with utility providers."
2. "Having [the end runs] already in place (and if possible, power available from the electrical utility, in the box) will make you a lot more attractive for other people's deployments, as well. Once you've got the conduit in, copper and fiber are really easy, and you might as well do both. Moreover, you don't have to do all the houses at once. If only some of the neighbors want to do it, they can get copper or fiber pulled through the conduit later. All at once will be cheaper on a per-house basis, but if you can only get buy-in from a few of them, that's no problem either. The conduit is the most important part."
3. "Don't underestimate how much work this is going to be. Pace yourself. Don't get upset with yourself if you're only halfway done, a year from now. This is the kind of thing that's vastly more expensive if you rush it, but can be economical if you wait for bargains and synergies."

This will be a longer-term project and there are still a lot of significant hurdles but the journey is going to be fun.